Plug PCs: compare computers from every brand
← Back to catalog
Arduino

Portenta H7

ModelABX00042GTIN7630049202252
ChipSTM32H747XI
WirelessWi-Fi, Bluetooth
USBUSB-C
Form factorPortenta

Specifications 19

Processor & memory
Microcontroller
STM32H747XI dual Cortex-M7+M4 32bit low power Arm MCU (datasheet)
I/O & pins
UART
4x ports (2 with flow control)
MKR Headers
Use any of the existing industrial MKR shields on it
ADC
3× ADCs with 16-bit max. resolution (up to 36 channels, up to 3.6 MSPS)
DAC
2× 12-bit DAC (1 MHz) available, only one is accessible by the user through the external A6 pin
Connectivity
Display Connector
MIPI DSI host & MIPI D-PHY to interface with low-pin count large display
Ethernet PHY
10 / 100 Mbps (through expansion port only)
Camera Interface
8-bit, up to 80 MHz
Board Power Supply (USB/VIN)
5V
Radio module
Murata 1DX dual WiFi 802.11b/g/n 65 Mbps and Bluetooth (Bluetooth Low Energy. 5 via Cordio stack, Bluetooth Low Energy 4.2 via Arduino Stack) ( datasheet )
High-density Connectors
Two 80 pin connectors will expose all of the board's peripherals to other devices
USB-C
Host / Device, DisplayPort out, High / Full Speed, Power delivery
Power
Supported Battery
Li-Po Single Cell, 3.7V, 700 mAh Minimum (integrated charger)
Circuit Operating Voltage
3.3V
Physical
Operational Temperature
-40 °C to +85 °C
Graphics
Graphics
Chrom-ART graphical hardware Accelerator
More details
Secure Element (default)
NXP SE0502 ( datasheet )
Timers
22x timers and watchdogs
SD Card
Interface for SD Card connector (through expansion port only)

Price history

loading…
Where to buyArduino ↗

Plug PCs can earn a commission when you buy through links on this page, at no extra cost to you.

Report an error or suggest a correction →

Compare the Portenta H7

Embed this product card on your site

Paste where the live card should appear: