Plug PCs: compare computers from every brand
← Back to catalogWhere to buyBambu Lab ↗
Bambu Lab
Bambu Lab A2L Combo
TechnologyFDM
Build volume330 × 320 × 325 mm
Max nozzle temp300 °C
Max bed temp80 °C
Max speed500 mm/s
Weight28.2 lb
Specifications 58
Temperatures
- Max Nozzle Temperature
- 300 °C
- Max Heatbed Temperature
- 80 ℃
Sensors & calibration
- Filament Run Out Sensor
- Supported
- Filament Tangle Sensor
- Supported
- Clumping Detection
- Supported
- Cutting Mat Type Detection
- Supported
Physical & power
- Wi-Fi Operating Frequency
- 2412 - 2472 MHz (CE/MIC) 2412 - 2462 MHz (FCC) 2400 - 2483.5 MHz (SRRC)
- Power Loss Recovery
- Supported
- Max Power
- 1000 W@110 V
- Net Weight
- 12.8 kg (Gross Weight: A2L 17.0 kg, A2L AMS Combo 18.9 kg)
- Physical Dimensions
- 544 mm*529 mm*505 mm
- Chassis
- Aluminum and Steel
- Outer Frame
- Plastic
- Voltage
- 100-120 VAC, 50/60 Hz
- Supported Operating System
- MacOS、Windows、Linux
Printing
- Build Volume (W*D*H)
- 330 mm*320 mm*325 mm
- Extruder Gear
- Hardened Steel
- Nozzle
- Stainless Steel
- Supported Nozzle Diameter
- 0.2 mm, 0.4 mm, 0.6 mm, 0.8 mm
- Filament Cutter
- Built-in
- Filament Diameter
- 1.75 mm
- Extruder Motor
- Servo Extruder Motor
- Build Plate Material
- Flexible Steel Plate
- Included Build Plate Type
- Textured PEI Plate
- Supported Build Plate Type
- Textured PEI plate, Engineering Plate, Cool Plate SuperTack
- Max Speed of Toolhead
- 500 mm/s
- Max Acceleration of Toolhead
- 10 m/s²
- Max Flow for Hotend
- 28 mm³/s (Test parameters: 150 mm round model with a single outer wall
Bambu Lab PLA Basic
220 °C printing temperature) - Part Cooling Fan
- Closed Loop Control
- Hotend Cooling Fan
- Closed Loop Control
- Filament Odometry
- Supported
- Communication
- Wi-Fi, Bambu-Bus
- Supported Material Type
- Paper, PVC, vinyl, leather, and more
- Multi-Material System
- AMS included
Connectivity
- Storage
- 32g MicroSD Card
- Networking
- Not Available
- Wireless Network
- 2.4G Wi-Fi
- Wi-Fi Transmitter Power (EIRP)
- <23 dBm (FCC), <20 dBm (CE/SRRC)
- Wi-Fi Protocol
- IEEE 802.11 b/g/n
- Control Interface
- Touchscreen, mobile App, PC App
Display & controls
- Touchscreen
- 3.5 inch, 240*320 Touchscreen
- Camera
- Low-frame-rate camera, up to 1080P, supports timelapse photography
- Motion Controller
- Single-core Cortex-M4 Processor & Single-core Cortex-M7 Processor
Warranty & support
- Warranty
- 2-year warranty
- Supported Pen Diameter
- 10.5 mm–12.5 mm
- Supported Image Type
- Bitmap and Vector Images
More details
- PLA, PETG, TPU, PVA
- Suitable for Printing
- PLA-CF、PETG-CF
- Suitable for Printing (Replace with Hardened Steel Nozzle)
- Environment Requirement
- 15 -30 °C
- Slicer
- Bambu Studio Supports third-party slicers which export standard Gcode, such as Super Slicer, PrusaSlicer and Cura, but certain advanced features may not be supported.
- Cutting Area
- 300 mm * 300 mm
- Drawing Area
- 300 mm * 255 mm
- Cutting Mat Type
- LightGrip and StrongGrip Cutting Mats
- Blade Type
- 45°*0.35 mm
- Blade Pressure Range
- 50 gf–600 gf
- Max Cutting Thickness
- 0.5 mm
- Blade and Pen Recognition
- Supported
- Bundle
- A2L Combo
Price history
Plug PCs can earn a commission when you buy through links on this page, at no extra cost to you.