Plug PCs: compare computers from every brand
← Back to catalogWhere to buyBambu Lab ↗
Bambu Lab
Bambu Lab H2C AMS Combo / Standard
TechnologyFDM
Build volume325 × 320 × 320 mm
Max nozzle temp350 °C
Max bed temp120 °C
Max speed1000 mm/s
Toolheads2 nozzles · multi-material
EnclosureEnclosed
Weight71.7 lb
Specifications 65
Temperatures
- Max Nozzle Temperature
- 350 °C
- Max Heatbed Temperature
- 120 ℃
- Active Chamber Heating
- Supported
- Chamber Temperature Control Max Temperature
- 65 °C
- Chamber Heat Circulation Fan
- Closed Loop Control
Electronics & firmware
- Main Control Board Fan
- Closed Loop Control
- Application Processor
- Quad-core ARM with NPU
Sensors & calibration
- Door Sensor
- Supported
- Filament Run Out Sensor
- Supported
- Filament Tangle Sensor
- Supported
Physical & power
- Wi-Fi Operating Frequency
- 2412 - 2472 MHz, 5150 - 5850 MHz (FCC/CE) 2400 - 2483.5 MHz, 5150 - 5850 MHz (SRRC)
- Power Loss Recovery
- Supported
- Max Power
- 1250 W@110 V
- Typical Power
- 200 W@110 V (Single Nozzle Printing PLA)
- Net Weight
- 32.5 kg (Gross Weight: H2C AMS Combo 44.7 kg
H2C Laser Full Combo-10W 49.0 kg
H2C Laser Full Combo-10W 49.5 kg) - Physical Dimensions
- 492*514*626 mm³ Recommended Space for Printer: 700 mm*700 mm*1100 mm
- Chassis
- Aluminum and Steel
- Outer Frame
- Plastic and Glass
- Voltage
- 100-120 VAC, 50/60 Hz
- Supported Operating System
- MacOS, Windows, Linux
Printing
- Nozzle Camera
- Built-in
1920*1080 - Toolhead Camera
- Built-in
1600*1200 - Printing Technology
- Fused Deposition Modeling
- Build Volume (W*D*H)
- Single Nozzle Printing: 325*320*320 mm³ (Left) Single Nozzle Printing: 305*320*325 mm³ (Right) Dual Nozzle Printing: 300*320*325 mm³ Total Volume for Two Nozzles: 330*320*325 mm³
- Extruder Gear
- Hardened Steel
- Nozzle
- Hardened Steel
- Supported Nozzle Diameter
- 0.2 mm, 0.4 mm, 0.6 mm, 0.8 mm
- Filament Cutter
- Built-in
- Filament Diameter
- 1.75 mm
- Extruder Motor
- Bambu Lab High-precision Permanent Magnet Synchronous Motor
- Build Plate Material
- Flexible Steel Plate
- Included Build Plate Type
- Textured PEI Plate
- Supported Build Plate Type
- Textured PEI plate, Engineering Plate
- Max Speed of Toolhead
- 1000 mm/s
- Max Acceleration of Toolhead
- 20,000 mm/s²
- Max Flow for Hotend
- 40 mm³/s (Test parameters: 250 mm round model with a single outer wall
Bambu Lab ABS
280 °C printing temperature) - Part Cooling Fan
- Closed Loop Control
- Cooling Fan for Hotend
- Closed Loop Control
- Chamber Exhaust Fan
- Closed Loop Control
- Auxiliary Part Cooling Fan
- Closed Loop Control
- Toolhead Enhanced Cooling Fan
- Closed Loop Control
- Supported Filament Type
- PLA, PETG, TPU, PVA, BVOH, ABS, ASA, PC, PA, PET, PPS
Carbon/Glass Fiber Reinforced PLA, PETG, PA, PET, PC, ABS, ASA, PPA, PPS - Filament Odometry
- Supported with AMS
- Multi-Material System
- AMS included
Connectivity
- Storage
- Built-in 8 GB EMMC and USB Port
- Networking
- Not Available
- Wireless Network
- Wi-Fi
- Wi-Fi Transmitter Power (EIRP)
- 2.4 GHz: <23 dBm (FCC)
<20 dBm (CE/SRRC/MIC) 5 GHz Band1/2: <23 dBm (FCC/CE/SRRC/MIC) 5 GHz Band3: <30 dBm (CE)
<24 dBm (FCC) 5 GHz Band4: <23 dBm (FCC/SRRC)
<14 dBm (CE) - Wi-Fi Protocol
- IEEE 802.11 a/b/g/n
- Control Interface
- Touchscreen, mobile App, PC App
- Network Kill Switch
- Not Available
- Removable Network Module
- Not Available
- 802.1X Network Access Control
- Not Available
Display & controls
- Touchscreen
- 5-inch 720*1280 Touchscreen
- Live View Camera
- Built-in
1920*1080 - BirdsEye Camera
- Built-in
3264*2448 (Equipped with Laser Edition) - Motion Controller
- Dual-core Cortex-M4 and Single-core Cortex-M7
Warranty & support
- Warranty
- 2-year warranty
More details
- Pre-filter Grade
- G3
- HEPA Filter Grade
- H12
- Activated Carbon Filter Type
- Granulated Coconut Shell
- VOC Filtration
- Superior
- Particulate Matter Filtration
- Supported
- Slicer
- Bambu Studio Supports third-party slicers which export standard G-code, such as Super Slicer, PrusaSlicer and Cura, but certain advanced features may not be supported.
- Bundle
- H2C AMS Combo / Standard
Price history
Plug PCs can earn a commission when you buy through links on this page, at no extra cost to you.
Compare the Bambu Lab H2C AMS Combo / Standard
- Bambu Lab H2C AMS Combo / Standard vs Prusa CORE One L+ (HighTemp Hotend) Prusa USS Drybox Bundle$2,199
- Bambu Lab H2C AMS Combo / Standard vs Prusa CORE One L+ (HighTemp Hotend)$2,169
- Bambu Lab H2C AMS Combo / Standard vs Original Prusa SL1S Speed 3D printer$2,159
- Bambu Lab H2C AMS Combo / Standard vs Prusa CORE One+ (Gen 2) INDX 8-Tool$2,249
- Bambu Lab H2C AMS Combo / Standard vs Prusa CORE One L+ (HighTemp Hotend) Advanced Filtration Bundle$2,249