Plug PCs: compare computers from every brand
← Back to catalogWhere to buyBambu Lab ↗
Bambu Lab
Bambu Lab X2D AMS Combo
TechnologyFDM
Build volume256 × 256 × 260 mm
Max nozzle temp300 °C
Max bed temp120 °C
Max speed1000 mm/s
Toolheads2 nozzles · multi-material
EnclosureEnclosed
Weight35.8 lb
Specifications 67
Temperatures
- Max Nozzle Temperature
- 300 °C
- Max Heatbed Temperature
- 120 ℃
- Active Chamber Heating
- Supported
- Chamber Temperature Control Max Temperature
- 65 °C
- Chamber Heat Circulation Fan
- Closed Loop Control
- Operating Temperature
- 10 °C-30 °C
Electronics & firmware
- Main Control Board Fan
- Closed Loop Control
- Application Processor
- Quad-core ARM with dedicated NPU
Sensors & calibration
- Door Sensor
- Supported
- Filament Run Out Sensor
- Supported
- Filament Tangle Sensor
- Supported
Physical & power
- Wi-Fi Operating Frequency
- 2412 - 2472 MHz, 5150 - 5850 MHz (FCC/CE) 2400 - 2483.5 MHz, 5150 - 5850 MHz (SRRC)
- Power Loss Recovery
- Supported
- Max Power³
- 1100 W@110 V
- Steady-State Power
- Using the Printer in different regions, you may need to purchase a transformer accordingly.
- Net Weight
- 16.25 kg (Gross Weight: X2D 20.2 kg, X2D AMS Combo 22.2 kg)
- Physical Dimensions
- 392*406*478 mm³ Recommended printer space:500 × 700 × 850 mm
- Chassis
- Plastic and Steel
- Outer Frame
- Plastic, Glass, and Metal
- Voltage
- 100-120 VAC , 50/60 Hz
- Supported Operating System
- MacOS, Windows, Linux
Printing
- Toolhead Camera
- Built-in
1600*1200 - Printing Technology
- Fused Deposition Modeling
- Main Extruder Gear
- Hardened Steel
- Main Extruder Motor
- Bambu Lab High-precision Permanent Magnet Synchronous Motor
- Auxiliary Extruder Gear
- Hardened Steel
- Auxiliary Extruder Motor
- Stepper Motor
- Nozzle
- Hardened Steel
- Included Nozzle Diameter
- 0.4 mm
- Supported Nozzle Diameter
- 0.2 mm, 0.4 mm, 0.6 mm, 0.8 mm
- Filament Cutter
- Built-in
- Filament Diameter
- 1.75 mm
- Max Speed of Toolhead
- 1000 mm/s
- Max Acceleration of Toolhead
- 20,000 mm/s²
- Max Flow for Hotend (Standard Flow Hotend)
- 40 mm³/s (Test parameters: 250 mm round model with a single outer wall
Bambu Lab ABS
280 °C printing temperature) - Max Flow for Hotend (Optional High Flow Hotend)
- 65 mm³/s (Test parameters: 250 mm round model with a single outer wall
Bambu Lab ABS
280 °C printing temperature) - Part Cooling Fan
- Closed Loop Control
- Cooling Fan for Hotend
- Closed Loop Control
- Chamber Exhaust Fan
- Closed Loop Control
- Auxiliary Part Cooling Fan
- Closed Loop Control
- Main Hotend
- PLA, PETG, ABS, ASA, TPU, Support for PLA, Support for PLA/PETG, Support for ABS, Support for PA/PET, PET, PA, PC, PVA
Carbon/Glass Fiber Reinforced PLA, PETG, ABS, ASA, PA6, PAHT, PPA, PET - Auxiliary Hotend
- PLA (excluding PLA Aero), PETG, ABS, ASA, TPU for AMS, Support for PLA, Support for PLA/PETG, Support for ABS, Support for PA/PET, PET, PA, PC, PVA
Carbon/Glass Fiber Reinforced PLA, PETG, ABS, ASA, PA6, PAHT, PET - Filament Odometry
- Supported with AMS
- Multi-Material System
- AMS included
Connectivity
- Storage
- Built-in 8 GB EMMC and USB Port
- Networking
- Not Available
- Wireless Network
- Dual-Band Wi-Fi
- Wi-Fi Transmitter Power (EIRP)
- 2.4 GHz: <23 dBm (FCC)
<20 dBm (CE/SRRC/MIC) 5 GHz Band1/2: <23 dBm (FCC/CE/SRRC/MIC) 5 GHz Band3: <30 dBm (CE)
<24 dBm (FCC) 5 GHz Band4: <23 dBm (FCC/SRRC)
<14 dBm (CE) - Wi-Fi Protocol
- IEEE 802.11 a/b/g/n
- Control Interface
- Touchscreen, mobile App, PC App
- Network Kill Switch
- Not Available
- Removable Network Module
- Not Available
- 802.1X Network Access Control
- Not Available
Display & controls
- Touchscreen
- 5-inch 1280*720 Touchscreen
- Live View Camera
- Built-in
1920*1080 - Motion Controller
- Dual-core Cortex-M4 and Single-core Cortex-M7
Warranty & support
- Warranty
- 2-year warranty
More details
- Pre-filter Grade
- G3
- HEPA Filter Grade
- H12
- Activated Carbon Filter Type
- Granulated Coconut Shell
- VOC Filtration
- Supported
- Particulate Matter Filtration
- Supported
- Slicer
- Bambu Studio Supports third-party slicers which export standard G-code, such as Super Slicer, PrusaSlicer and Cura, but certain advanced features may not be supported.
- Bundle
- X2D AMS Combo
Features
- Build Volume (W*D*H)
- Supported Build Plate Type
- Auxiliary Hotend (print with caution¹)
Price history
Plug PCs can earn a commission when you buy through links on this page, at no extra cost to you.