Plug PCs — operator console

← Back to catalog
Hardkernel

(DISCONTINUED)ODROID-H3+

Model ODROID-H3+out of stock
ProcessorIntel Celeron N6005
Memory64 GB
Storage6 GB
Display4K

Specifications 9 normalized

Processor
Processor
Intel Celeron N6005 Processor (10nm, Quad-Core, TDP 10W) H3+(N6005) : up to 3.3Ghz 4 MB L2 Cache Intel UHD Graphics (24/32 EU up to 900 MHz)
Memory & storage
Memory
2 x DDR4 1.2V SO-DIMM slots Dual Channel, up to 2933 MT/s (DDR4-PC23400) Max memory capacity 64 GB DDR3/DDR5 are not supported
Storage
1 x eMMC connector (bootable and selectable on BIOS) Various eMMC modules can be purchased at Hardkernel store 2 x SATA3 6Gbps ( SATA Port-Multiplier is NOT compatible ) 1 x M.2 slot (PCIe 3.0 x 4, supports NGFF-2280 cards) M.2 SATA SSD is not supported
Drive Bays
1× M.2
Display
Display
1 x DisplayPort 1.2 (up to 4K@60 Hz) 1 x HDMI 2.0 (up to 4K@60 Hz) Dual simultaneous display support
Connectivity
Networking
2 x GbE LAN ports (RJ45, supports 10/100/1000/2500 Mbps) Realtek RTL8125B Supports Wake-On-Lan LED indicators (Green: Link, Amber: Traffic)
Camera & audio
Audio
1 x Audio out (3.5 mm jack) 1 x Audio in (3.5 mm jack) 1 x SPDIF out (ALC1200, HDA codec) * HDMI & DP have audio output too.
Power & battery
Power
DC jack : outer (ground) diameter 5.5 mm, inner(positive) diameter 2.1 mm DC 14V ~ 20V (up to 60W) – DC 15V/4A power adapter is recommended if you don't use two 3.5" HDDs – DC 19V/7A power adapter is recommended if you two 3.5" HDDs together Power consumption: – IDLE : ≃1..9W – CPU Stress : ≃15W – CPU+GPU Stress : ≃18W – Power-off : ≃0.25W – Suspend : ≃0.6W
Physical & build
Form Factor
110 mm x 110 mm x 47 mm Approx.

I/O Ports 11

  • 2x USB 3.0 Host ports
  • 2x USB 2.0 Host ports
  • 1x Peripheral Expansion Header (24-pin, 2.54mm pitch)
  • 1x UART (TXD/RXD/RTS/CTS)
  • 2x I2C (SCL/SDA)
  • 3x USB 2.0
  • 2x GbE LAN ports (RJ45, supports 10/100/1000/2500 Mbps)
  • 1x DisplayPort 1.2 (up to 4K@60Hz)
  • 1x HDMI 2.0 (up to 4K@60Hz)
  • 1x Audio out (3.5mm jack)
  • 1x Audio in (3.5mm jack)

Price history

loading…
Where to buyHardkernel ↗checking retailers…
Developer · record & raw JSON
status
active
currency
USD
source
push:hardkernel
{
  "slug": "hk-odroid-h3-plus",
  "category": "sbc",
  "name": "(DISCONTINUED)ODROID-H3+",
  "price": 165,
  "specs": {
    "Processor": "Intel Celeron N6005 Processor (10nm, Quad-Core, TDP 10W) H3+(N6005) : up to 3.3Ghz 4MB L2 Cache Intel UHD Graphics (24/32 EU up to 900MHz)",
    "Memory": "2 x DDR4 1.2V SO-DIMM slots Dual Channel, up to 2933 MT/s (DDR4-PC23400) Max memory capacity 64GB DDR3/DDR5 are not supported",
    "Storage": "1 x eMMC connector (bootable and selectable on BIOS) Various eMMC modules can be purchased at Hardkernel store 2 x SATA3 6Gbps ( SATA Port-Multiplier is NOT compatible ) 1 x M.2 slot (PCIe 3.0 x 4, supports NGFF-2280 cards) M.2 SATA SSD is not supported",
    "Networking": "2 x GbE LAN ports (RJ45, supports 10/100/1000/2500 Mbps) Realtek RTL8125B Supports Wake-On-Lan LED indicators (Green: Link, Amber: Traffic)",
    "Display": "1 x DisplayPort 1.2 (up to 4K@60Hz) 1 x HDMI 2.0 (up to 4K@60Hz) Dual simultaneous display support",
    "Audio": "1 x Audio out (3.5mm jack) 1 x Audio in (3.5mm jack) 1 x SPDIF out (ALC1200, HDA codec) * HDMI & DP have audio output too.",
    "Form Factor": "110mm x 110mm x 47mm Approx.",
    "Power": "DC jack : outer (ground) diameter 5.5mm, inner(positive) diameter 2.1mm DC 14V ~ 20V (up to 60W) – DC 15V/4A power adapter is recommended if you don’t use two 3.5“ HDDs – DC 19V/7A power adapter is recommended if you two 3.5” HDDs together Power consumption: – IDLE : ≃1..9W – CPU Stress : ≃15W – CPU+GPU Stress : ≃18W – Power-off : ≃0.25W – Suspend : ≃0.6W"
  },
  "ports": [
    "2x USB 3.0 Host ports",
    "2x USB 2.0 Host ports",
    "1x Peripheral Expansion Header (24-pin, 2.54mm pitch)",
    "1x UART (TXD/RXD/RTS/CTS)",
    "2x I2C (SCL/SDA)",
    "3x USB 2.0",
    "2x GbE LAN ports (RJ45, supports 10/100/1000/2500 Mbps)",
    "1x DisplayPort 1.2 (up to 4K@60Hz)",
    "1x HDMI 2.0 (up to 4K@60Hz)",
    "1x Audio out (3.5mm jack)",
    "1x Audio in (3.5mm jack)"
  ],
  "url": "https://www.hardkernel.com/shop/odroid-h3-plus/",
  "configurable": false,
  "rating_value": null,
  "availability": "out of stock"
}