{
  "slug": "hk-odroid-n2l-with-4gbyte-ram",
  "category": "sbc",
  "name": "(DISCONTINUED)ODROID-N2L with 4GB RAM",
  "price": 59,
  "specs": {
    "Processor": "Amlogic S922X Processor (12nm) / Quad-core Cortex-A73(2.2Ghz) and Dual-core Cortex-A53(2Ghz) / ARMv8-A architecture with Neon and Crypto extensions / Mali-G52 GPU with 6 x Execution Engines (800Mhz)",
    "Memory": "LPDDR4 4GiB or 2GiB with 32-bit bus width / Data rate: 3216 MT/s / 1.1Volt low power design",
    "Storage": "1 x eMMC connector (8G, 16G, 32G, 64G and 128G are available) / 1 x microSD slot (DS/HS modes up to UHS-I SDR104)",
    "Networking": "Optional WiFi or Ethernet USB adapters",
    "Display": "1 x HDMI 2.0 (up to 4K@60Hz with HDR, CEC, EDID) / – Although the +5V Power pin is able to supply a minimum of 300mA, according to HDMI 2.0 specification, a sink shall not draw more than 50mA of current from the +5V Power pin.",
    "Audio": "1 x HDMI digital output",
    "Form Factor": "Dimensions including Fan heatsink: 69mm x 56mm x 22mm / Dimensions including Tall heatsink: 69mm x 56mm x 32mm / Weight: 50g including Fan heatsink, 66g including Tall heatsink",
    "Power": "1 x DC jack : outer (negative) diameter 5.5mm, inner(positive) diameter 2.1mm / 7.5V ~ 16V (Recommend range of input) / – DC 12V/2A power adapter is recommendedPower consumption: / – IDLE : ≃ 1.5W (Performance governor), 1.3W(Conservative governor) / – CPU Stress (Passive Heat-Sink) : ≃ 5.4W (@1908/2208MHz, Stock), 5.8W (@2016/2400MHz, Overclock) / – CPU Stress (Active Cooling-FAN) : ≃ 6.1W (@1908/2208MHz, Stock), 6.4W (@2016/2400MHz, Overclock) / – Power-Off : ≃ 0.2W"
  },
  "ports": [
    "1x Micro SD Slot",
    "1x UART for System Console",
    "1x HDMI 2.0",
    "40x GPIO Pins",
    "1x USB 3.0, Down",
    "1x USB2.0",
    "1x MIPI DSI 4Lane Connector(TBD)"
  ],
  "url": "https://www.hardkernel.com/shop/odroid-n2l-with-4gbyte-ram/",
  "configurable": false,
  "rating_value": null,
  "availability": "out of stock"
}