Plug PCs — operator console

← Back to catalog
Hardkernel

ODROID-M1 with 4GB RAM

Model ODROID-M1
ProcessorRockchip RK3568 / L1 instruction cache: 32 KB
Display4K

Specifications 10 normalized

Processor
Processor
Rockchip RK3568 Processor / L1 instruction cache: 32 KB, 4-way set associative (128 sets), 64 byte lines, shared by 1 processor / L1 data cache: 32 KB, 4-way set associative (128 sets), 64 byte lines, shared by 1 processor / L3 data cache: 512KB , 16-way set associative (512 sets), 64 byte lines, shared by 4 processorsQuad-Core Cortex-A55 (1.992 GHz) / ARMv8-A architecture with Neon and Crypto extensions / Mali-G52 MP2 GPU with 4 x Execution Engines (650Mhz)
Memory & storage
Memory
4 or 8 GiB LPDDR4 with 32-bit bus width / Data rate: 3120 MT/s, up to 1,560 MHz
Storage
1 x eMMC slot / 1 x Micro SD slot (DS/HS mode up to UHS-I SDR104) / 1 x NVME M.2 SSD (PCIe 3.0 x 2) / 1 x SATA3.0
Drive Bays
1× M.2
Display
Display
1 x HDMI 2.0 (up to 4K@60 Hz with HDR, EDID) / 1 x MIPI-DSI (works with 800 x 1280 LCD)
Connectivity
Networking
1 x GbE LAN ports (RJ45, supports 10/100/1000 Mbps) / – Realtek RTL8211F (Ethernet transceiver) / – LED indicators / * Green LED: Flashing by data traffics at 100Mbps connection / * Amber LED: Flashing by data traffics at 1000Mbps connection
Camera & audio
Audio
1 x 3.5 mm phone jack / 1 x mono speaker output / 1 x HDMI sound
Power & battery
Power
1 x DC jack : outer (negative) diameter 5.5 mm, inner (positive) diameter 2.1 mm / DC input : 7.5V ~ 15.5V / – DC 12V/2A power adapter is recommended / – IDLE : ≃ 1.25W / – CPU Stress : ≃ 4.44W (Performance governor) / – Power Off : ≃ 0W
Physical & build
Form Factor
Board Dimensions: 90 mm x 122 mm x 16 mm / Heatsink Dimensions: 100 mm x 123 mm x 19 mm / Weight: 253 g including heatsink
Other
NPU
0.8Tops@INT8, integrated high-performance AI accelerator RKNN NPU / Supports one-click switching of Caffe/ TensorFlow /TFLite/ONNX/ PyTorch /Keras/Darknet

I/O Ports 15

  • 1x Micro USB2.0 Device only
  • 1x RJ45 Ethernet Port (10/100/1000)
  • 1x HDMI 2.0
  • 1x IR Receiver
  • 2x USB 2.0
  • 2x USB 3.0
  • 1x Micro SD Slot
  • 1x M.2 NVMe M-Key PCIe3.0 2-Lane
  • 1x SATA3
  • 40x GPIO Pins
  • 1x SATA Power (5volt only)
  • 1x MIPI CSI 2Lane
  • 1x UART for System Console
  • 1x MIPI DSI 4Lane
  • 1x 3.5mm Headphone Jack

Price history

loading…
Where to buyHardkernel ↗checking retailers…
Developer · record & raw JSON
status
active
currency
USD
source
push:hardkernel
{
  "slug": "hk-odroid-m1-with-4gbyte-ram",
  "category": "sbc",
  "name": "ODROID-M1 with 4GB RAM",
  "price": 76,
  "specs": {
    "Processor": "Rockchip RK3568 Processor / L1 instruction cache: 32 KB, 4-way set associative (128 sets), 64 byte lines, shared by 1 processor / L1 data cache: 32 KB, 4-way set associative (128 sets), 64 byte lines, shared by 1 processor / L3 data cache: 512KB , 16-way set associative (512 sets), 64 byte lines, shared by 4 processorsQuad-Core Cortex-A55 (1.992GHz) / ARMv8-A architecture with Neon and Crypto extensions / Mali-G52 MP2 GPU with 4 x Execution Engines (650Mhz)",
    "Memory": "4 or 8GiB LPDDR4 with 32-bit bus width / Data rate: 3120 MT/s, up to 1,560MHz",
    "Storage": "1 x eMMC slot / 1 x Micro SD slot (DS/HS mode up to UHS-I SDR104) / 1 x NVME M.2 SSD (PCIe 3.0 x 2) / 1 x SATA3.0",
    "NPU": "0.8Tops@INT8, integrated high-performance AI accelerator RKNN NPU / Supports one-click switching of Caffe/ TensorFlow /TFLite/ONNX/ PyTorch /Keras/Darknet",
    "Networking": "1 x GbE LAN ports (RJ45, supports 10/100/1000 Mbps) / – Realtek RTL8211F (Ethernet transceiver) / – LED indicators / * Green LED: Flashing by data traffics at 100Mbps connection / * Amber LED: Flashing by data traffics at 1000Mbps connection",
    "Display": "1 x HDMI 2.0 (up to 4K@60Hz with HDR, EDID) / 1 x MIPI-DSI (works with 800 x 1280 LCD)",
    "Audio": "1 x 3.5mm phone jack / 1 x mono speaker output / 1 x HDMI sound",
    "Form Factor": "Board Dimensions: 90mm x 122mm x 16mm / Heatsink Dimensions: 100mm x 123mm x 19mm / Weight: 253 g including heatsink",
    "Power": "1 x DC jack : outer (negative) diameter 5.5mm, inner (positive) diameter 2.1mm / DC input : 7.5V ~ 15.5V / – DC 12V/2A power adapter is recommended / – IDLE : ≃ 1.25W / – CPU Stress : ≃ 4.44W (Performance governor) / – Power Off : ≃ 0W"
  },
  "ports": [
    "1x Micro USB2.0 Device only",
    "1x RJ45 Ethernet Port (10/100/1000)",
    "1x HDMI 2.0",
    "1x IR Receiver",
    "2x USB 2.0",
    "2x USB 3.0",
    "1x Micro SD Slot",
    "1x M.2 NVMe M-Key PCIe3.0 2-Lane",
    "1x SATA3",
    "40x GPIO Pins",
    "1x SATA Power (5volt only)",
    "1x MIPI CSI 2Lane",
    "1x UART for System Console",
    "1x MIPI DSI 4Lane",
    "1x 3.5mm Headphone Jack"
  ],
  "url": "https://www.hardkernel.com/shop/odroid-m1-with-4gbyte-ram/",
  "configurable": false,
  "rating_value": null,
  "availability": "in stock"
}