Rockchip RK3566 Processor / L1 instruction cache: 32 KB, 4-way set associative (128 sets), 64 byte lines, shared by 1 processor / L1 data cache: 32 KB, 4-way set associative (128 sets), 64 byte lines, shared by 1 processor / L3 data cache: 512KB , 16-way set associative (512 sets), 64 byte lines, shared by 4 processorsQuad-Core Cortex-A55 (1.8 GHz) / ARMv8-A architecture with Neon and Crypto extensions / Mali-G52 GPU with 2 x Execution Engines (800Mhz)
Memory & storage
Memory
LPDDR4 4 or 8 GiB with 32-bit bus width, Data rate: 2112 MT/s, up to 1,055 MHz
Storage
64 GB eMMC (soldered) — 1 x 64 GB eMMC embedded (soldered to the PCB) / 1 x Micro SD slot (UHS-I SDR104, Boot priority is always higher than eMMC) / 1 x NVME M.2 SSD (PCIe 2.1 x 1 lane)
Display
Display
1 x HDMI 2.0 (up to 4K@60 Hz with HDR, EDID) / 1 x MIPI DSI Interface (30pin connector which is different from 31pin of the original ODROID-M1)
Connectivity
Networking
1 x GbE LAN ports (RJ45, supports 10/100/1000 Mbps) / – Realtek RTL8211F Ethernet transceiver / – LED indicators / * Green LED: Flashing by data traffics at 100Mbps connection / * Amber LED: Flashing by data traffics at 1000Mbps connection
Power & battery
Power
1 x USB Type C for Power only / DC input : 4.9V ~ 5.3V / – USB Type C 5V/3A power adapter is recommended / – IDLE : ≃ 1.1W / – CPU Stress : ≃ 3.52W (Performance governor) / – Power Off : ≃ 0W
Physical & build
Form Factor
Board Dimensions: 90 mm x 65 mm x 16 mm / Weight: 52g including heatsink
Other
NPU
0.8 TOPS@INT8, Integrated AI accelerator RKNN NPU / Supports one-click switching of Caffe/TensorFlow/TFLite/ONNX/PyTorch/Keras/Darknet
I/O Ports 8
1x USB 2.0 host port
1x USB 3.0 host port
1x USB 2.0 micro OTG port
1x 40 pin GPIO and
1x 14 pin GPIO
1x GbE LAN ports (RJ45, supports 10/100/1000 Mbps)
1x HDMI 2.0 (up to 4K@60Hz with HDR, EDID)
1x MIPI DSI Interface (30pin connector which is different from 31pin of the orig
Price history
loading…
Where to buyHardkernel ↗checking retailers…Developer · record & raw JSON
status
active
currency
USD
source
push:hardkernel
{
"slug": "hk-odroid-m1s-with-8gbyte-ram",
"category": "sbc",
"name": "ODROID-M1S with 8GB RAM",
"price": 76.7,
"specs": {
"Processor": "Rockchip RK3566 Processor / L1 instruction cache: 32 KB, 4-way set associative (128 sets), 64 byte lines, shared by 1 processor / L1 data cache: 32 KB, 4-way set associative (128 sets), 64 byte lines, shared by 1 processor / L3 data cache: 512KB , 16-way set associative (512 sets), 64 byte lines, shared by 4 processorsQuad-Core Cortex-A55 (1.8GHz) / ARMv8-A architecture with Neon and Crypto extensions / Mali-G52 GPU with 2 x Execution Engines (800Mhz)",
"Memory": "LPDDR4 4 or 8GiB with 32-bit bus width, Data rate: 2112 MT/s, up to 1,055MHz",
"Storage": "64GB eMMC (soldered) — 1 x 64GB eMMC embedded (soldered to the PCB) / 1 x Micro SD slot (UHS-I SDR104, Boot priority is always higher than eMMC) / 1 x NVME M.2 SSD (PCIe 2.1 x 1 lane)",
"NPU": "0.8 TOPS@INT8, Integrated AI accelerator RKNN NPU / Supports one-click switching of Caffe/TensorFlow/TFLite/ONNX/PyTorch/Keras/Darknet",
"Networking": "1 x GbE LAN ports (RJ45, supports 10/100/1000 Mbps) / – Realtek RTL8211F Ethernet transceiver / – LED indicators / * Green LED: Flashing by data traffics at 100Mbps connection / * Amber LED: Flashing by data traffics at 1000Mbps connection",
"Display": "1 x HDMI 2.0 (up to 4K@60Hz with HDR, EDID) / 1 x MIPI DSI Interface (30pin connector which is different from 31pin of the original ODROID-M1)",
"Form Factor": "Board Dimensions: 90mm x 65mm x 16mm / Weight: 52g including heatsink",
"Power": "1 x USB Type C for Power only / DC input : 4.9V ~ 5.3V / – USB Type C 5V/3A power adapter is recommended / – IDLE : ≃ 1.1W / – CPU Stress : ≃ 3.52W (Performance governor) / – Power Off : ≃ 0W"
},
"ports": [
"1x USB 2.0 host port",
"1x USB 3.0 host port",
"1x USB 2.0 micro OTG port",
"1x 40 pin GPIO and",
"1x 14 pin GPIO",
"1x GbE LAN ports (RJ45, supports 10/100/1000 Mbps)",
"1x HDMI 2.0 (up to 4K@60Hz with HDR, EDID)",
"1x MIPI DSI Interface (30pin connector which is different from 31pin of the orig"
],
"url": "https://www.hardkernel.com/shop/odroid-m1s-with-8gbyte-ram/",
"configurable": false,
"rating_value": null,
"availability": "in stock"
}
○ connecting…