Plug PCs: compare computers from every brand
← Back to catalogWhere to buyCisco Meraki ↗
Cisco Meraki
Cisco Meraki CW9162
SKU
CW9162Ports1x 100/1000/2.5G BASE-T Ethernet (RJ45)
Port speed2.5G
Wi-FiUL/DL-OFDMA
Power draw30 W
Weight2.0 lb
Specifications 25
Ports & interfaces
- Interfaces
- 1x 100/1000/2.5G BASE-T Ethernet (RJ45)
1x DC power connector (5.5 mm, center positive)
USB 2.0 at 4.5 W (with 802.3at power)
Console - Only available in DNA Mode
Power & PoE
- Power
- Power over Ethernet: 37 - 42.5 V (802.3at compliant)
DC Power Adapter (12V)
Power consumption: Up to 30 W
Minimum power requirement: 30 W (802.3at complaint)
Power over Ethernet injector and DC adapter sold separately
Actual power consumption may vary depending on the AP usage
Wireless
- 2x2:2 MU-MIMO 802.11ax compatible; ~3.9 Gbps tri-radio aggre
- Enhanced transmit power and receive sensitivity
Full-time Wi-Fi location tracking via dedicated Scanning radio
Integrated enterprise security and guest access
Application-aware traffic shaping
Optimized for voice and video
Self-configuring, plug-and-play deployment
Sleek design blends into office environments - Radios
- 2.4 GHz 802.11b/g/n/ax client access radio
5 GHz 802.11a/n/ac/ax client access radio
6 GHz 802.11ax client access radio
2.4 GHz, 5 GHz, and 6 GHz tri-band Air Marshal WIDS/WIPS, spectrum analysis, & location analytics radio
2.4 GHz Bluetooth Low Energy (BLE) radio with Beacon and BLE scanning support Concurrent operation of all five radios - Antenna
- Integrated omni-directional antennas
2.4 GHz: Peak gain 4 dBi, internal antenna, omnidirectional in azimuth
5 GHz: Peak gain 5 dBi, internal antenna, omnidirectional in azimuth
6 GHz: Peak gain 5 dBi, internal antenna, omnidirectional in azimuth - 802.11 ax compatible, 802.11ac Wave 2 and 802.11n Capabiliti
- UL/DL-OFDMA
Target Wait Time (TWT)
BSS coloring*
SU-MIMO and DL MU-MIMO support
Maximal ratio combining (MRC)
802.11ax beamforming
20 and 40 MHz* channels (802.11n)
20, 40*, 80 MHz channels (802.11ac Wave 2)
20, 40*, 80 and 160 MHz channels (802.11ax)
Note: *40 MHz channels are supported only in 5 & 6 GHz bands.
Up to 1024-QAM on 2.4 GHz, 5 GHz and 6 GHz bands
Packet aggregation - A-MPDU (transmit and receive), A-MSDU (transmit and receive) - Radio Approvals
- FCC Part 15C
15E RSS-247 (Canada)
EN 300 328 ( v2.1.1)
EN 301 893 (v2.1.1)
AS/NZS 4268 (Australia/NZ)
NOM-121 (Mexico)
NCC LP0002 (Taiwan)
For additional country-specific regulatory information, please contact Meraki sales
Management & software
- Physical security
- Kensington lock slot
- Security
- Integrated Layer 7 firewall with mobile device policy management
Real-time WIDS/WIPS with alerting and automatic rogue AP containment with Air Marshal
Flexible guest access with device isolation
VLAN tagging (802.1q) and tunneling with IPsec VPN
PCI compliance reporting
WPA2-PSK, WPA2-Enterprise, WPA3 - Personal, WPA3 - Enterprise, WPA3 - Enhanced Open (OWE)
EAP Local Authentication - EAP-TTLS/PAP/ PEAP-GTC, EAP-TLS
AES encryption
Enterprise Mobility Management (EMM) & Mobile Device Management (MDM) integration
Cisco ISE integration for Guest access and BYOD Posturing
Physical & environment
- Weight
- 2.05 lb. (0.93 kg)
- Physical Dimensions
- 7.8 × 7.8 × 1.7 in. (200 × 200 × 44.45 mm)
- Mounting
- All Cisco standard mounting hardware supported (AIR-AP-BRACKET-2 included)
Desktop, ceiling, and wall mount capable
Ceiling tile rail (9/16, 15/16, or 1 ½" flush or recessed rails), assorted cable junction boxes - Certifications
- Wi-Fi Alliance: Wi-Fi 6 (R2), Wi-Fi 6E, WPA3-R3, WPA3-Suite B, Enhanced Open Security
Bluetooth SIG: Bluetooth Low Energy
Warranty & support
- Warranty
- Indoor access point
Lifetime hardware warranty with advanced replacement included - Quality of Service
- Advanced Power Save (U-APSD)
WMM Access Categories with DSCP and 802.1p support
Layer 7 application traffic identification and shaping
More details
- Environment
- Nonoperating (storage) temperature: -22° to 158 °F (-30° to 70 °C)
Nonoperating (storage) altitude test: 25˚C (77 °F) at 15,000 ft (4600 m)
Operating temperature: 32° to 122 °F (0° to 50 °C)
Operating humidity: 10% to 90% (non-condensing)
Operating altitude test: 40 °C (104 °F) at 9843 ft (3000 m) - Reliability
- Mean Time Between Failure (MTBF):
2,370,107 hrs at 77 °F (25 °C) operating temperature
991,862 hrs at 113 °F (45 °C) operating temperature - Mobility
- PMK, OKC, & 802.11r for fast Layer 2 roaming
Distributed or centralized layer 3 roaming - Analytics
- Embedded location analytics reporting and device tracking
Global L7 traffic analytics reporting per network, per device, & per application - LED Indicators
- One power/booting/firmware upgrade status
- Ordering Information
- CW9162I-MR: Catalyst CW9162I Cloud Managed 802.11ax Compatible AP
MA-PWR-30W-XX: Meraki AC Adapter for MR Series
MA-INJ-6: Meraki Multigigabit 802.3bt Power over Ethernet Injector (power cable separate SKU)
Cisco AIR-PWRINJ-7 802.3bt
Cisco AIR-PWRINJ-6 802.3at power cord - MA-PWR-CORD-XX (XX Country Code) should be ordered separately for the AC adapter and Ethernet injector
Mounting bracket: AIR-AP-BRACKET-1 and AIR-AP-BRACKET-2(bundled)
Meraki access point license required - IEEE Standards
- 802.3 ab/bz
802.3at
802.11a/b/g/n/ac/ax
802.11d/h/i/k/r/u/v/w - Safety Approvals
- CSA and CB 60950 & 62368
EN 60601 certified
Conforms to UL 2043 (Plenum Rating) - EMI Approvals (Class B)
- FCC Part 15B
ICES-003 (Canada)
EN 301 489-1-17
EN 55032
EN 55024 (Europe)
CISPR 32 (Australia/NZ) VCCI (Japan) - Exposure Approvals
- FCC Part 2 RSS-102 (Canada)
EN 50385
EN 6231
EN 62479 (Europe)
AS/NZS 2772 (Australia/NZ)
Price history
Plug PCs can earn a commission when you buy through links on this page, at no extra cost to you.