Plug PCs: compare computers from every brand
← Back to catalogWhere to buyCisco Meraki ↗provantage · $855.96 ↗check stock 2h agoinsight · $1,000.99 ↗check stock 9h ago
Cisco Meraki
Cisco Meraki MR44
SKU
MR44MPNMR44-HWPorts1x 100/1000/2.5G BASE-T Ethernet (RJ45)
Port speed2.5G
Power draw30 W (max)
Form factorAll standard mounting hardware included
Weight1.6 lb
Specifications 25
Ports & interfaces
- Interfaces
- 1x 100/1000/2.5G BASE-T Ethernet (RJ45)
1x DC power connector (5.5 mm x 2.5 mm, center positive)
Power & PoE
- Power
- Power over Ethernet: 42.5 - 57 V (802.3at) or 37 - 57 V (802.3af) - low power mode **
Alternative: 12 V DC input
Power consumption: 30 W max (802.3at) or 15 W max (802.3af) - low power mode **
Power over Ethernet injector and DC adapter sold separately
Note: Actual power consumption may vary depending on the AP usage.
This is because the default MR44 firmware image has support for the low-power mode, however, MR 27.5/27.5.1 or lower firmware does not have low power mode support. Using 802.3af switch/power injector with MR44 set to 27.5/27.5.1 or lower firmware might result in unexpected behaviors including but not limited to reboots or degraded performance.
Wireless
- 2x2:2 (2.4GHz) + 4x4:4 (5GHz) MU-MIMO 802.11ax ; 2.7 Gbps* d
- Integrated enterprise security and guest access
Application-aware traffic shaping
Optimized for voice and video
Self-configuring, plug-and-play deployment
Sleek design blends into office environments
Full-time Wi-Fi location tracking via dedicated 3rd radio - Radios
- 2.4 GHz 802.11b/g/n/ax client access radio
5 GHz 802.11a/n/ac/ax client access radio
2.4 GHz & 5 GHz dual-band WIDS/WIPS, spectrum analysis, & location analytics radio
2.4 GHz Bluetooth Low Energy (BLE) radio with Beacon and BLE scanning support
Concurrent operation of all four radios
Supported frequency bands (country-specific restrictions apply):
2.401 - 2.484 GHz
5.150 - 5.250 GHz (UNII-1)
5.250-5.350 GHZ (UNII-2A)
5.490 - 5.730 GHz (UNII-2C)
5.735 -5.825 GHz (UNII-3) - Antenna
- Internal Antenna (5.1dBi max gain at 2.4 GHz, 5.9dBi max gain at 5 GHz)
- 802.11ax, 802.11ac Wave 2 and 802.11n Capabilities
- DL-OFDMA**, UL-OFDMA**, TWT support**, BSS Coloring**
2.4 GHz: 2 x 2 multiple input, multiple output (MIMO) with two spatial streams
5 GHz: 4 x 4 multiple input, multiple output (MIMO) with four spatial streams
SU-MIMO, UL MU-MIMO** and DL MU-MIMO support
Maximal ratio combining (MRC) & beamforming
20 and 40 MHz* channels (802.11n)
20, 40*, and 80 MHz channels (802.11ac Wave 2)
20, 40* and 80 MHz channels (802.11ax)
Note: *40 MHz channels are supported only in the 5 GHz band.
Up to 1024-QAM on both 2.4 GHz & 5 GHz bands
Packet aggregation - Radio Approvals
- Canada: FCC Part 15C, 15E, RSS-247
Europe: EN 300 328, EN 301 893
Australia/NZ: AS/NZS 4268
Mexico: IFT, NOM-208
Taiwan: NCC LP0002
For additional country-specific regulatory information, please contact Meraki Sales
Management & software
- Physical Security
- Two security screw options (included) (13.5 mm long and 2.5 mm diameter and 5 mm head)
Kensington lock hard point
Concealed mount plate with anti-tamper cable bay - Security
- Integrated Layer 7 firewall with mobile device policy management
Real-time WIDS/WIPS with alerting and automatic rogue AP containment with Air Marshal
Flexible guest access with device isolation
VLAN tagging (802.1q) and tunneling with IPsec VPN
PCI compliance reporting
WEP***, WPA, WPA2-PSK, WPA2-Enterprise with 802.1X, WPA3 - Personal**, WPA3 - Enterprise**, WPA3 - Enhanced Open (OWE)**
EAP-TLS, EAP-TTLS, EAP-MSCHAPv2, EAP-SIM
TKIP and AES encryption
Enterprise Mobility Management (EMM) & Mobile Device Management (MDM) integration
Cisco ISE integration for Guest access and BYOD Posturing
Physical & environment
- Weight
- 26.07 oz (739 g)
- Physical Dimensions
- 12.05" × 5.06" × 1.74" (30.6 cm × 12.84 cm × 4.43 cm), not including desk mount feet or mount plate
- Mounting
- All standard mounting hardware included
Desktop, ceiling, and wall mount capable
Ceiling tile rail (9/16, 15/16 or 1 1⁄ 2" flush or recessed rails), assorted cable junction boxes
Bubble level on the mounting cradle for accurate horizontal wall mounting - Certifications
- RoHS
For additional country-specific regulatory information, please contact Meraki sales
Warranty & support
- Warranty
- Indoor access point
Lifetime hardware warranty with advanced replacement included - Quality of Service
- Advanced Power Save (U-APSD)
WMM Access Categories with DSCP and 802.1p support
Layer 7 application traffic identification and shaping
More details
- Environment
- Operating altitude: Up to 40,000 feet (12,192 meters)
Operating temperature: 32 °F to 104 °F (0 °C to 40 °C)
Humidity: 5 to 95% non-condensing - Reliability
- Mean Time Between Failure (MTBF): 500,000 hours at +25 °C operating temperature
- Mobility
- PMK, OKC, & 802.11r for fast Layer 2 roaming
Distributed or centralized layer 3 roaming - Analytics
- Embedded location analytics reporting and device tracking
Global L7 traffic analytics reporting per network, per device, & per application - LED Indicators
- 1 power/booting/firmware upgrade status
- Ordering Information
- MR44-HW: Meraki MR44 Cloud Managed 802.11ax AP
MA-PWR-30W-XX: Meraki AC Adapter for MR Series (XX = US/EU/UK/AU)
MA-INJ-4: Meraki MR 802.3at PoE Injector (Power Cord Not Included)
MA-INJ-6: Meraki MR MultiGigabit 802.3bt Injector (Power Cord Not Included)
Note: Meraki access point license required. - IEEE Standards
- 802.11a, 802.11ac, 802.11ax, 802.11b, 802.11e, 802.11g, 802.11h, 802.11i, 802.11k, 802.11n, 802.11r, and 802.11u***
- Safety Approvals
- CSA and CB 60950 & 62368
Conforms to UL 2043 (Plenum Rating) - EMI Approvals (Class B)
- Canada: FCC Part 15B, ICES-003
Europe: EN 301 489-1-17, EN 55032, EN 55024
Australia/NZ: CISPR 22
Japan: VCCI - Exposure Approvals
- Canada: FCC Part 2, RSS-102
Europe: EN 50385, EN 62311, EN 62479
Australia/NZ: AS/NZS 2772
Price history
Plug PCs can earn a commission when you buy through links on this page, at no extra cost to you.