Plug PCs: compare computers from every brand
← Back to catalogWhere to buyCisco Meraki ↗provantage · $1,244.25 ↗check stock 2h agoinsight · $1,461.99 ↗check stock 9h ago
Cisco Meraki
Cisco Meraki MR46
SKU
MR46MPNMR46-HWPorts1x 100/1,000/2.5G BASE-T Ethernet (RJ45)
Port speed2.5G
Power draw30 W (max)
Form factorAll standard mounting hardware included
Weight1.8 lb
Specifications 26
Ports & interfaces
- Interfaces
- 1x 100/1,000/2.5G BASE-T Ethernet (RJ45)
1x DC power connector (5.5 mm x 2.5 mm, center positive)
Power & PoE
- Power
- Power over Ethernet: 42.5 - 57 V (802.3at compliant)
Alternative: 12 V DC input
Power consumption: 30 W max (802.3at required )
Power over Ethernet injector and DC adapter sold separately
Note: Actual power consumption may vary depending on the AP usage.
Wireless
- 4x4:4 MU-MIMO 802.11ax ; 2.98* Gbps dual-radio aggregate fra
- Integrated enterprise security and guest access
Application-aware traffic shaping
Optimized for voice and video
Self-configuring, plug-and-play deployment
Sleek design blends into office environments
Full-time Wi-Fi location tracking via dedicated third radio - Radios
- 2.4 GHz 802.11b/g/n/ax client access radio
5 GHz 802.11a/n/ac/ax client access radio
2.4 GHz and 5 GHz dual-band WIDS/WIPS, spectrum analysis, and location analytics radio
2.4 GHz Bluetooth Low Energy (BLE) radio with beacon and scanning support
Concurrent operation of all four radios
Supported frequency bands (country-specific restrictions apply): 2.401 - 2.484 GHz
5.150 - 5.250 GHz (UNII-1)
5.250 - 5.350 GHZ (UNII-2A)
5.490 - 5.730 GHz (UNII-2C)
5.735 -5.825 GHz (UNII-3) - Antenna
- Internal antenna (5.4 dBi gain at 2.4 GHz, 6 dBi gain at 5 GHz)
- 802.11ax, 802.11ac Wave 2 and 802.11n Capabilities
- DL-OFDMA**, UL-OFDMA**, TWT support**, BSS coloring**
4 x 4 multiple input, multiple output (MIMO) with four spatial streams
SU-MIMO, UL MU-MIMO**, and DL MU-MIMO support
Maximal ratio combining (MRC) & beamforming
20 and 40 MHz* channels (802.11n)
20, 40*, and 80 MHz channels (802.11ac Wave 2)
20, 40* and 80 MHz channels (802.11ax)
Note: *40 MHz channels are supported only in the 5 GHz band.
Up to 1024-QAM on both 2.4 GHz and 5 GHz bands
Packet aggregation
** Feature is automatically enabled via firmware update to MR 27+ - Radio Approvals
- Canada: FCC part 15C, 15E, RSS-247
Europe: EN 300 328, EN 301 893
Australia/NZ: AS/NZS 4268
Mexico: IFT, NOM-208
Taiwan: NCC LP0002
For additional country-specific regulatory information, please contact Meraki sales
Management & software
- Physical Security
- Two security screw options (included) (13.5 mm long, 2.5 mm diameter, 5 mm head)
Kensington lock hard point
Concealed mount plate with anti-tamper cable bay - Security
- Integrated layer 7 firewall with mobile device policy management
Real-time WIDS/WIPS with alerting and automatic rogue AP containment with Air Marshal
Flexible guest access with device isolation
VLAN tagging (802.1q) and tunneling with IPsec VPN
PCI compliance reporting
WEP*, WPA, WPA2-PSK, WPA2-Enterprise with 802.1X, WPA3 - Personal**, WPA3 - Enterprise**, WPA3 - Enhanced Open (OWE)***
EAP-TLS, EAP-TTLS, EAP-MSCHAPv2, EAP-SIM
TKIP and AES encryption
Enterprise mobility management (EMM) and Mobile device management (MDM) integration
Cisco ISE integration for guest access and BYOD posturing
* Feature can be enabled by contacting support
** Feature supported on firmware MR 27+ and can be made available on MR 26
see the WPA3 article for more information
*** Feature will be made available via a future software update
Physical & environment
- Weight
- 28.22 oz (800 g)
- Physical Dimensions
- 12.05" x 5.06" x 1.74" (30.6 cm x 12.84 cm x 4.43 cm), not including desk mount feet or mount plate
- Mounting
- All standard mounting hardware included
Desktop, ceiling, and wall mount capable
Ceiling tile rail (9/16, 15/16 or 1 1⁄ 2" flush or recessed rails), assorted cable junction boxes
Bubble level on mounting cradle for accurate horizontal wall mounting - Certifications
- RoHS
For additional country-specific regulatory information, please contact Meraki sales
Warranty & support
- Warranty
- Indoor access point
Lifetime hardware warranty with advanced replacement included - Quality of Service
- Advanced power save (U-APSD)
WMM access categories with DSCP and 802.1p support
Layer 7 application traffic identification and shaping
More details
- Environment
- Operating altitude: Up to 40,000 feet (12,192 meters)
Operating temperature: 32 °F to 104 °F (0 °C to 40 °C)
Humidity: 5% to 95% non-condensing - Reliability
- Mean time between failure (MTBF): 1,406,652 hrs at +25 °C operating temperature
- Mobility
- PMK, OKC, and 802.11r for fast layer 2 roaming
Distributed or centralized layer 3 roaming - Analytics
- Embedded location analytics reporting and device tracking
Global layer 7 traffic analytics reporting per network, per device, and per application - LED Indicators
- 1 power/booting/firmware upgrade status
- Ordering Information
- MR46-HW: Meraki MR46 cloud managed 802.11ax AP
MA-PWR-30W-XX: Meraki AC adapter for MR series (XX = US/EU/UK/AU)
MA-INJ-4: Meraki MR 802.3at PoE Injector (Power Cord Not Included)
MA-INJ-6: Meraki MR MultiGigabit 802.3bt Injector (Power Cord Not Included)
Note: Meraki access point license required - IEEE Standards
- 802.11a, 802.11ac, 802.11ax, 802.11b, 802.11e, 802.11g, 802.11h, 802.11i, 802.11k, 802.11n, 802.11r, and 802.11u*
* Feature can be enabled by contacting support
see the Hotspot 2.0 article for more information - Safety Approvals
- CSA and CB 60950 & 62368
Conforms to UL 2043 (plenum rating) - EMI Approvals (Class B)
- Canada: FCC part 15B, ICES-003
Europe: EN 301 489-1-17, EN 55032, EN 55024
Australia/NZ: CISPR 22
Japan: VCCI - Exposure Approvals
- Canada: FCC part 2, RSS-102
Europe: EN 50385, EN 62311, EN 62479
Australia/NZ: AS/NZS 2772 - EMC
- EN 61000
Price history
Plug PCs can earn a commission when you buy through links on this page, at no extra cost to you.