Plug PCs: compare computers from every brand
← Back to catalogWhere to buyCisco Meraki ↗provantage · $2,432.46 ↗check stock 2h agoinsight · $2,739.99 ↗check stock 9h ago
Cisco Meraki
Cisco Meraki MR57
SKU
MR57MPNMR57-HWPort speed5G / 2.5G
Wi-FiDL-OFDMA, TWT support, BSS coloring*
Power draw30 W
Weight3.8 lb
Specifications 25
Ports & interfaces
- Interfaces
- 2x 100/1000/2.5G/5G BASE-T Ethernet (RJ45)
1x DC power connector (5.5 mm x 2.5 mm, center positive)
Power & PoE
- Power
- Power over Ethernet: 42.5 - 57V (PoE+ and 802.3bt compliant)
Alternative 54V DC input via DC adapter
Power consumption: 30 W to 40 W (802.3bt)
Minimum power requirement: 30 W (PoE+, USB is disabled )
Maximum power consumption: 40 W
Power over Ethernet injector and DC adapter sold separately.
Note: Actual power consumption may vary depending on the AP usage.
Wireless
- Four 4:4 MU-MIMO 802.11ax compatible; 7.78 Gbps tri-radio ag
- Enhanced transmit power and receive sensitivity
Full-time Wi-Fi location tracking via dedicated third radio
Integrated enterprise security and guest access
Application-aware traffic shaping
Optimized for voice and video
Self-configuring, plug-and-play deployment - Radios
- 2.4 GHz 802.11b/g/n/ax client access radio
5 GHz 802.11a/n/ac/ax client access radio
6 GHz 802.11ax client access radio
2.4 GHz, 5 GHz, and 6 GHz tri-band Air Marshal WIDS/WIPS, spectrum analysis, & location analytics radio
2.4 GHz Bluetooth Low Energy radio with beacon and scanning support concurrent operation of all five radios - Antenna
- Integrated omni-directional antennas (4.5 dBi gain at 2.4 GHz, 5.5 dBi gain at 5 GHz, and 5.5 dBi gain at 6 GHz)
- 802.11ax, 802.11ac Wave 2 and 802.11n capabilities
- DL-OFDMA, TWT support, BSS coloring*
4 x 4 multiple input, multiple output (MIMO) with four spatial streams on 6 GHz
4 x 4 multiple input, multiple output (MIMO) with four spatial streams on 5 GHz
4 x 4 multiple input, multiple output (MIMO) with four spatial streams on 2.4 GHz
SU-MIMO, UL and DL MU-MIMO support
Maximal ratio combining (MRC) & beamforming
20 and 40 MHz* channels (802.11n)
20, 40*, and 80 MHz channels (802.11ac Wave 2)
20, 40* and 80 MHz channels (802.11ax
Note: *40 MHz channels are supported only in 5 & 6 GHz bands.
Up to 1024-QAM on all three - 2.4 GHz, 5 GHz, and 6 GHz bands
Packet aggregation - Radio Approvals
- Canada: FCC Part 15C, 15E, RSS-247
Europe: EN 300 328, EN 301 893
Australia/NZ: AS/NZS 4268
Mexico: IFT, NOM-208
Taiwan: NCC LP0002
For additional country-specific regulatory information, please contact Meraki Sales
Management & software
- Physical Security
- Kensington lock slot
Concealed mount plate with anti-tamper cable bay - Security
- Integrated layer 7 firewall with mobile device policy management
Real-time WIDS/WIPS with alerting and automatic rogue AP containment with Air Marshal
Flexible guest access with device isolation
VLAN tagging (802.1q) and tunneling with IPsec VPN
PCI compliance reporting
WEP*, WPA, WPA2-PSK, WPA2-Enterprise with 802.1X, WPA3 - Personal*, WPA3 - Enterprise*, WPA3 - Enhanced Open (OWE)*
EAP-TLS, EAP-TTLS, EAP-MSCHAPv2, EAP-SIM
TKIP and AES encryption
Enterprise Mobility Management (EMM) & Mobile Device Management (MDM) integration
Cisco ISE integration for guest access and BYOD posturing
Physical & environment
- Weight
- 1.7 kg
- Physical Dimensions
- 260 mm x 260 mm x 56 mm, including desk-mount feet or mount plate
- Mounting
- All standard mounting hardware included (AIR-AP-BRACKET-2)
Desktop, ceiling, and wall mount capable
Ceiling tile rail (9/16, 15/16, or 1 ½" flush or recessed rails), assorted cable junction boxes - Certifications
- RoHS
For additional country-specific regulatory information, please contact Meraki sales
Warranty & support
- Warranty
- Indoor access point
Lifetime hardware warranty with advanced replacement included - Quality of Service
- Advanced power save (U-APSD)
WMM access categories with DSCP and 802.1p support
Layer 7 application traffic identification and shaping
More details
- Environment
- Operating temperature: 32 °F - 104 °F (0 °C - 40 °C)
Humidity: 5% to 95% non-condensing - Reliability
- Mean time between failure (MTBF): 998,440 hrs at +25 °C operating temperature
- Mobility
- PMK, OKC, and 802.11r for fast layer 2 roaming
Distributed or centralized layer 3 roaming - Analytics
- Embedded location analytics reporting and device tracking
Global layer 7 traffic analytics reporting per network, per device, and per application - LED Indicators
- One power/booting/firmware upgrade status
- Ordering Information
- MR57-HW: Meraki MR57 cloud-managed 802.11a-compatible AP
MA-PWR-50WAC: Meraki AC adapter for MR series
MA-INJ-6: Meraki MR MultiGigabit 802.3bt Injector (Power Cord Not Included)
Note: Power cord - MA-PWR-CORD-XX (XX Country Code) should be ordered separately for the AC adapter and Ethernet injector
Mounting bracket: AIR-AP-BRACKET-1 and AIR-AP-BRACKET-2
Meraki access point license required. - IEEE Standards
- 802.11a, 802.11ac, 802.11ax, 802.11b, 802.11e, 802.11g, 802.11h, 802.11i, 802.11k, 802.11n, 802.11r, 802.11w and 802.11u
- Safety Approvals
- CSA and CB 60950 & 62368
Conforms to UL 2043 (Plenum Rating)
EN 60601 Certified - EMI Approvals (Class B)
- Canada: FCC Part 15B, ICES-003
Europe: EN 301 489-1-17, EN 55032, EN 55024
Australia/NZ: CISPR 22
Japan: VCCI - Exposure Approvals
- Canada: FCC Part 2, RSS-102
Europe: EN 50385, EN 62311, EN 62479
Australia/NZ: AS/NZS 2772
Price history
Plug PCs can earn a commission when you buy through links on this page, at no extra cost to you.