EN 55032:2015 + A11:2020 EN 55035:2017 + A11:2020 EN IEC 61000-3-2:2019 EN 61000-3-3:2013 + A1:2019 EN 301 489-1 V2.2.3 EN 301 489-17 V3.2.4 EN 301 489-19 V2.1.1 EN 301 489-52 V1.2.1
ESD
EN 61000-4-2:2009
Radiated Immunity
EN 61000-4-3:2020
EFT
EN 61000-4-4:2012
CS
EN 61000-4-6:2014
DIP
EN 61000-4-11:2020
RF: Standards
EN 300 328 V2.2.2 EN 301 511 V12.5.1 EN 301 908-1 V15.2.1 EN 301 908-2 V13.1.1 EN 301 908-13 V13.2.1 EN 303 413 V1.1.1
Safety (Ordinary Locations): Standards
CE:EN IEC 62368-1:2020 + A11:2020, EN IEC 62311:2020, EN 50665:2017 RCM:AS/NZS 62368.1:2022 CB:IEC 62368-1:2018 UL/CSA Safety:UL 62368-1 (3rd Ed., Rev. December 13, 2019), C22.2 No. 62368-1:19 (3rd Ed., Rev. December 13, 2019)
Safety (Hazardous Locations): Standards
UL/CSA Safety:UL 121201, 9th Ed., Rev. April 1, 2021, CAN/CSA C22.2 No. 213, 3rd Ed. April 2021
Hazardous Environments
Class I, Division 2, Groups A, B, C, D Class I, Zone 2, Group IIC -40°C ≤ Ta ≤ 75°C, T4, IP30
Block/Allow list
Offers operator block/allow listing by country or individual operators
Operator Selection Modes
Module connection modes including auto, manual, and manual-auto
APN
Implemented automatic APN selection with the option for manual APN configuration
Multiple PDN
Enables the use of different PDNs for multiple network access and services
Vo LTE
Provides control of VoLTE service
SMS Limit
Offers control over the number of SMS messages that can be sent within a certain period
USSD
Ensures sending and reading Unstructured Supplementary Service Data messages
Status
IMSI, ICCID, operator, operator state, data connection state, network type, bandwidth, connected band, signal strength (RSSI), SINR, RSRP, RSRQ, EC/IO, RSCP, mobile signal graphs, data sent/received, LAC, TAC, cell ID, ARFCN, UARFCN, EARFCN, MCC, and MNC
Deny Data on Roaming
Offers mobile data prohibition when module registers on a roaming network
Low Signal Reconnect
Ensures mobile data reconnection in case of poor signal
Bridge Mode
Direct connection (bridge) between mobile ISP and device on LAN
Passthrough Mode
Router assigns it's mobile WAN IP address to another device on LAN
APN Database Management
Enables access to add, delete or edit records of APN database for auto APN functionality
Mobile data limit
Provides warnings about limit and control to used data within customizable period
SMS Utilities
Rules that perform certain actions when they are activated by SMS messages
SMS Forwarding
To HTTP, SMS and Email
Email to SMS
Connects to your email account and checks its inbox at the specified frequency. If it finds any new received emails with a specific subject (phone number in email subject), it sends the body of the email as an SMS message(s) to the recipient specified in the email subject field.
Auto Reply
Automatic replying to SMS messages that the device receives
Messages
Sending and reading of SMS messages
Call Utilities
Rules that perform certain actions when they are activated by a call
SMPP
SMPP protocol services for flexible short message data transfer
Modes
Access Point (AP), Mesh (802.11s), Client (STA), Multi AP
Access Point
Fast transition (802.11r), Radio Resource Measurement (802.11k), BSS Transition Management (802.11v), Client isolation, Hide SSID, WMM
Switch automatically and seamlessly to a reliable backup connection
Load balancing
Distribute traffic among multiple WAN connections to improve performance and reliability
Internet Status
Internet status track and log changes about availability of public Internet
IGMP Proxy
IGMP proxy (Multicast routing) forwards multicast traffic using IGMP signalling
Smart Queue Management
Smart Queue Management performs per-packet/per flow network scheduling, active queue length management (AQM), traffic shaping/rate limiting, and QoS (prioritisation)
Relayd
Relayd create transparent wireless bridge between Wi-Fi STA and LAN network
Topology
Displays network devices that belong to the same network
UDP Relay
UDP relay forward broadcast packets from a specified UDP port to configured interface
VRF
Virtual routing and forwarding, IP technology allows users to configure multiple routing table instances to simultaneously co-exist within the same router
VRRP
Virtual Router Redundancy Protocol is a computer networking protocol that provides for automatic assignment of available Internet Protocol (IP) routers to participating hosts
Hotspot
Captive portal (Hotspot), internal/external Radius server, SMS/SSO/MAC authorisation, internal/external landing page, walled garden, user scripts, URL parameters, user groups, individual user or group limitations, user management, 9 default customizable themes and option to upload and download custo
Firewall
IPv4, IPv6, connection tracking, statefull firewall, logging, zone based firewall, custom rules, DMZ, firewall statistics, rules list, tables list
Traffic Rules
Time-based restrictions, input/output/forward control, by protocol/port/IP address/MAC address
Targets
Accept, drop, reject, do not track, mark, change TTL, change DSCP
Client and server modes, Tunnel (TUN) or Bridged (TAP) types, NordVPN, ExpressVPN external providers static key, TLS, password, PKCS#12 authentication methoods, 27 encryption methods
Stunnel
Proxy designed to add TLS encryption functionality to existing clients and servers
L2 TP
Server, client, L2TP over IPSec, IPv6 support
L2 TPv3
Tunneling protocol that can be used as an alternative protocol to Multiprotocol Label Switching (MPLS) for encapsulation of multiprotocol Layer 2 communications traffic over IP networks
PPTP
Server, client
SSTP Client
SSTP client is a is a VPN tunnel that provides a mechanism to transport PPP traffic through an SSL/TLS channel
DMVPN
Spoke and Hub modes, GRE, IPSec, NHRP technologies
GRE
Tunnel, GRE tunnel over IPSec modes
Zero Tier
VPN which offers peer-to-peer mesh connections
Tinc
VPN that uses tunnelling and encryption to create a secure private network between hosts on the Internet
Wire Guard
VPN that and was designed with the goals of ease of use, high speed performance, and low attack surface
Eo IP
Ethernet over IP (EoIP) tunnelling is a protocol based on GRE RFC 1701 that creates an Ethernet tunnel between two routers on top of an IP connection
Azure IoT Hub
Data to Server support, direct method support, plug & play integration, DPS
AWS
Call device's API by using AWS Jobs functionality
Cumulocity / Cloud of Things
Reboot and firmware upgrade actions device, network and mobile parameters monitoring
Device reboot, firmware upgrade and configuration setting, Device, network and mobile monitoring parameters
SNMP
Available versions v1, v2 and v3, Signal strength, network type, Input/Output and events log notifications traps
MQTT Broker
System which coordinates messages between different clients
MQTT Publisher
Client instance that can send messages to the Broker, who can forward these messages to other clients (subscribers)
Traffic Logging
Netfilter userpace logging that provides the ability to set up periodic transfers of the selected traffic log to an FTP server
Event Juggler
Device boot, time, Hotspot connections, astronomical time, device logs events, GPS events, GSM, mobile data limit events, Input/output events Connection management, MQTT message, Email, HTTP request, Lua and other script execution, RMS management, profile change, device reboot actions, SMS, call, mo
Data to server
Device, manufactoring information, MQTT, Lua script, GSM, Mobile usage, Wi-Fi Scanner, DLMS, DNP3, Impulse Counter, Modbus, Modbus alarms, OPC UA, SMS, I/O and GPS data inputs HTTP, MQTT, SMS, FTP, SMTP, Socket, Lua script and Azure IoT Hub servers
JSON-RPC
Remote procedure call (RPC) system configuration protocol
SSH
Network protocol that enables secure communication between two computers over an unsecured network
Web UI
Graphical interface that allows users to interact with system through a web browser
API
Interface that allows different software applications to communicate and exchange data
HTTP/HTTPS
HTTP and HTTPS protocols used for communication between web browsers and devices
Printer Server
Printers that are connected to the router can be shared over the network and receive print jobs from multiple devices
Realtime Data
CPU utilisation, data usage and history, active network connections, real time wireless signal, real time mobile signal strength values, mobile data usage values over different periods of time
Controlling and monitoring of current I/O pin status
I/O juggler
Utility to create automated rules that perform certain actions based on Input state changes and other conditions
Scheduler
Can be used to configure a timetable of when an I/O pin state should change, based on days of the week or month and hours of the day.
NTP Client
NTP client for setting system time from NTP servers
Firmware From Server (FOTA)
Download suggested firmware from server
NTP Server
Act as a NTP server to broadcast time for other devices
NTPD
Utility with advanced NTP features which includes NTPv4
Configuration Profiles
Switching between multiple profiles, profile scheduler
Package Manager
Download/upgrade from server, offline upload
Module Firmware Update From Server
Mobile module firmware update from server
LED Management
Provides services for controlling hardware LEDs
Privileged Access Management (PAM)
Authorisation service priority, external users support, required/requisite/sufficient/optional types
Certificate Manager
Certificate creation tool allows to create CA, server, client, let's encrypt, SCEP certificates
IP Block
Blocks IP addresses after a configured number of unsuccessful authorisation attempts, supports timed or permanent blocking
Multiple Users
Multiple Web users with configurable access permissions
Multi Language
Change the WebUI language from English to German, Turkish, Spanish, Portuguese, Japanese or Ukrainian
CLI
Command line interface in Web
SMTP
Comunnication protocol used for sending and relaying emails between mail servers over the Internet
Troubleshoot
System diagnostic and troubleshooting tools
Backup
Tool for creating and restoring configuration backups
Events Log
Centralized log viewer for main system and service events
Auto Reboot
Periodic device reboot and automatic reboot on failed ping/wget requests, device reboot, modem reboot
DNS over HTTPS
DNS over HTTPS proxy enables secure DNS resolution by routing DNS queries over HTTPS
SCEP
SCEP (Simple Certificate Enrollment Protocol) is a standard protocol used for the automated issuance and management of digital certificates
VTYSH
Command line interface for dynamic route protocols
Tcpdump
Incoming/Outgoing Internet packet analyzer for troubleshooting connectivity issues
Speedtest
Provides a quick snapshot of Internet connection speed performance
Dynamic DNS
77 service providers, others can be configured manually
WEB filter
Helps control access to Internet web pages, supports blocklist or allowlist
UPNP
Automatically opens ports to allow devices to discover each other and establish communication on the same network
DLNA
Shares media among multimedia devices through a network
SSHFS
SSHFS filesystem client for mounting remote directories over a Secure Shell connection
Telnet
Telnet is a network protocol used to connect to remote machines and manage them through network
Emailrelay
Lightweight SMTP store-and-forward mail server, supports Server, Proxy, Command line modes
Impulse Counter
Counts impulses on selected I/O pins and stores the counts to db
WPA CLI
WPA Supplicant command line control utility
7-zip
Minified 7-zip archiver with 7z archive and AES-256 encryption
Socat
Command line based utility that establishes two bidirectional byte streams and transfers data between them
Development tools
SDK archive with a provided build environment
SDK Customization
You can create your own custom-branded firmware and web page application by changing colors, logos, and other elements in our firmware to fit your or your clients' needs
Input voltage range
9-30 VDC, reverse polarity protection, voltage surge/transient protection
PoE standards
Passive PoE over spare pairs. Possibility to power up through LAN1 port, not compatible with IEEE802.3af, 802.3at and 802.3bt standards, Mode B, 9-30 VDC
Input
1 x digital dry input (0 - 3 V), 1 x digital galvanically isolated input (0 - 30 V), 1 x analog input (0 - 24 V), 1 x Digital non-isolated input (on 4-pin power connector, 0 - 5 V detected as logic low, 8 - 30 V detected as logic high)
Output
1 x digital open collector output (30 V, 250 mA), 1 x SPST relay output (40 V, 4 A), 1 x Digital open collector output (30 V, 300 mA, on 4-pin power connector)
IO
2 x Inputs and 2 x Outputs on 10-pin industrial socket, 1 x Digital input and 1 x Digital output on 4-pin power connector (available from HW revision 1600)
Status LEDs
1 x Bi-color connection status, 5 x Mobile connection strength, 4 x ETH status, 1 x Power
Input Output
1 x 10-pin industrial socket for inputs/outputs
Antennas
2 x SMA for LTE, 2 x RP-SMA for Wi-Fi, 1 x SMA for GNSS
Button
Reboot/Reset
Mounting options
DIN rail (can be mounted on two sides), flat surface placement
○ connecting…