Plug PCs: compare computers from every brand
← Back to catalog
TP-Link

TL-WA801N 300Mbps Wireless N Access Point

ModelTL-WA801NGTIN845973099831
Portstrue ports
Port speed100M
Wi-FiWi-Fi 4
ManagementSNMP

Specifications 19

Power & PoE
External Power Supply
9VDC / 0.6A
Wireless
Wireless Standards
IEEE 802.11n, IEEE 802.11g, IEEE 802.11b
Wireless Modes
AP Mode
Multi-SSID Mode
Client Mode
Range Extender Mode
Wireless Functions
Enable/Disable Wireless Radio, WMM, Short GI, AP
Isolation, Wireless Statistics, Throughput Monitor
Wireless Security
WEP, WPA/WPA2, WPA/WPA2-PSK encryptions
Antenna
2 Fixed Omni-Directional Antennas
Management & software
Management Features
SNMP
Advanced Features
Up to 30 meters Passive PoE is supported
Physical & environment
Dimensions ( W x D x H )
7.1 × 5.1 × 1.4 in
(182 × 130 × 36 mm)
Certifications
FCC
Connectivity
Network Services Enabled by Default
Web Server
Manage and configure device through web (HTTP/HTTPS)
Port: 80/443 Protocol: TCP
DHCP Server
IP address assignment (DHCP)
Port: 67 Protocol: UDP
App management
Manage and configure device through app
Port: 20001 Protocol: TCP
Port: 20002 Protocol: UDP
Warranty & support
Quality of Service
WMM
More details
Button
Power On/Off Button, WPS Button, Reset Button
Frequency
2.4 GHz
Signal Rate
300 Mbps at 2.4 GHz
Reception Sensitivity
11g 6Mbps: -90dBm
11g 54Mbps: -77dBm
11n HT20 MC7: -73dBm
11n HT40 MC7: -70dBm
Package Content
Wireless Access Point TL-WA801N
Power Adapter
Passive PoE Power Injector
RJ45 Ethernet Cable
Quick Installation Guide
Environment
Operating Temperature: 0 °C~40 °C (32 °F ~104 °F)
Storage Temperature: -40 °C~70 °C (-40 °F ~158 °F)
Operating Humidity: 10%~90% RH
Storage Humidity: 5%~90% RH
Hardware Revision
V6

I/O Ports 1

  • 1× 10/100 M Ethernet Port(RJ45)
Where to buyTP-Link ↗colamco · $24.99 ↗Best price 15h agosabrepc · $34.82 ↗check stock 7h agoprovantage · $35.72 ↗ 50m ago

Plug PCs can earn a commission when you buy through links on this page, at no extra cost to you.

Embed this product card on your site

Paste where the live card should appear: