Plug PCs: compare computers from every brand
← Back to catalog
Cudy

16-Port 10/100 Mbps Ethernet Switch, FS1016 1.0

Model16-PortSKUFS1016
Ports16 ports
Port speed100M
Switching capacity3.2 Gbps
Power draw2 W (max)
Weight1.3 lb

Specifications 29

Ports & interfaces
10/100 Mbps RJ45 Ports
16
Extend Mode Ports
#1~#14
VLAN Mode Ports
#1~#14
Performance
Max Copper Speed and Distance
Cat. 3 or higher cable: 100 meters at 10 Mbps Cat. 5 or higher cable: 100 meters at 100 Mbps Cat. 5e or higher cable: 250 meters at 10 Mbps
Copper Speed and Distance Note
250-meter transmission is only available on the Extend Mode ports when the Extend Mode is activated.
MAC Address Table
8192
VLANs
2048
Max Switching Capacity
3.2 Gbps
Max Forwarding Rate
2.38 Mpps
Jumbo Frame
2 KB
Packet Buffer
2 Mbit
Forwarding Method
Store-and-Forward
Power & PoE
Power Input Type
AC Inlet
Power Methods
AC
Power Input
90-260V~ 50/60 Hz
Max Power Consumption
2.0 W
Idle Power Consumption
0.8 W
Management & software
802.3 Protocols
802.3i 10BASE-T 802.3u 100BASE-TX 802.3x Flow Control
Physical & environment
Product Weight
600 g (21.16 oz.)
Dimension
200 × 118 × 44 mm
7.87 × 4.65 × 1.73 inches
MTBF
>200,000 h
Connectivity
Networking
Full Duplex Half Duplex (CSMA/CD) Auto-Negotiation Auto MDI/MDIX
Physical & build
Casing Material
Metal
More details
LED
Power Link/ACT of Each Ethernet Port
Physical Buttons
VLAN/Default/Extend DIP Switch
Grounding Methods
Three-Prong Plug Grounding Point
EMS
IEC/EN 61000-4-2, Level 3 ESD: Contact: 6kV
Air: 8kV
IEC/EN 61000-4-5, Level 4 Surge: Power: DM 2kV, CM 4kV
RJ45: CM 4kV
Environment
Operating Temperature: 0 ℃ ~ 40 ℃ (32 ℉ ~104 ℉)
Storage Temperature: -40 ℃ ~ 70 ℃ (-40 ℉ ~ 158 ℉)
Operating Humidity: 10% ~ 90% non-condensing
Storage Humidity: 5% ~ 90% non-condensing
Installation
Desktop Rackmount via Brackets

Price history

loading…
Where to buyCudy ↗

Plug PCs can earn a commission when you buy through links on this page, at no extra cost to you.

Report an error or suggest a correction →
Embed this product card on your site

Paste where the live card should appear: