Plug PCs: compare computers from every brand
← Back to catalogWhere to buyCudy ↗
Cudy
16-Port Gigabit Managed PoE+ Switch with 2 Uplink GbE Ports and 2 SFP, GS2018PS2 1.0
Model
16-PortSKUGS2018PS2Ports18 ports
Port speed1.25G / 1G
PoE budget#1~#16
Switching capacity40 Gbps
Power draw30 W
Weight6.0 lb
Specifications 50
Ports & interfaces
- Max Power on a Single PoE Port
- 30 W
- 1.25G SFP Slots
- 2
- Gigabit RJ45 Ports
- 16
- Gigabit RJ45 PoE Ports
- #1~#16
- PoE Port Notes
- PoE ports support 802.3at/af standards.
- Console Ports
- 1× RJ45
- Extend Mode Ports
- Configurable
- VLAN Mode Ports
- Configurable
- Port Management
- Port On/Off Port Negotiation Speed Port Security/MAC Constraint Port Trunk (Static Aggregation) 802.3ad LACP (Dynamic Aggregation) Port Mirroring Data Rate Limit Jumbo Frame Settings Storm Control Traffic Monitor MAC Address Management EEE (802.3az)
Performance
- Copper Speed and Distance Note
- 250-meter transmission is available when the port speed is set at 10 Mbps in the software.
- MAC Address Table
- 8192
- VLANs
- 4096
- Max Switching Capacity
- 40 Gbps
- Max Forwarding Rate
- 29.76 Mpps
- Jumbo Frame
- 9.6 KB
- Packet Buffer
- 4 Mbit
- Forwarding Method
- Store-and-Forward
Power & PoE
- Power Input Type
- AC Inlet
- Power Methods
- AC
- Power Input
- 100-240V~ 50/60 Hz
- Power Supply
- 200 W
- Max Power Excluding PoE
- 12 W
- PoE Priority
- Configurable
- PoE Management
- PoE Priority PoE Watchdog On/Off PoE Wattage/Voltage/Current Status PoE Time Schedule
System hardware
- DDR/RAM
- 128 MB (1 Gbit)
- Flash/ROM
- 16 MB (128 Mbit) NOR
Management & software
- 802.3 Protocols
- 802.3x Flow Control 802.3i 10BASE-T 802.3u 100BASE-TX 802.3ab 1000BASE-T 802.3z 1000BASE-X 802.3az Power Saving 802.3ad Dynamic Aggregation 802.3af PoE 802.3at PoE
- 802.1 Protocols
- 802.1d: STP 802.1w: RSTP 802.1s: MSTP 802.1p: LAN Layer 2 QoS/CoS 802.1q: VLAN Bridge Operation 802.1ab: LLDP/LLDP-MED 802.1x User Authentication
- L2 Features
- IGMP Snooping MLD Snooping Loop Prevention Ring Protection DHCP Snooping STP/RSTP MSTP BPDU Protection LLDP Config and Neighbors MTU VLAN Port-Based VLAN 802.1Q VLAN Voice VLAN MAC VLAN IP VLAN GVRP DSCP QoS 802.1p QoS Port-Based QoS SP/WRR Scheduling
- L3 Features
- Interface Configuration ACL (Layer 2 - Layer 4) ARP Detection IP Source Guard UDLD AAA RADIUS TACACS+ Management VLAN
- Firmware Upgrade
- Local Upgrade
Physical & environment
- Product Weight
- 2730 g (96.3 oz.)
- Dimension
- 440 × 204 × 44 mm
17.32 × 8.03 × 1.73 inches - MTBF
- >200,000 h
Connectivity
- Networking
- Full Duplex Half Duplex (CSMA/CD) Auto-Negotiation Auto MDI/MDIX
Physical & build
- Casing Material
- Metal
Network
- SFP speed
- 1.25 Gbps
More details
- LED
- Power System Link/ACT of Each Ethernet Port PoE Status of Each PoE Port
- Physical Buttons
- Reset Button
- Optical Spec and Distance
- Depends on the Installed Optical Module
- Grounding Methods
- Three-Prong Plug Grounding Point
- EMS
- IEC/EN 61000-4-2 ESD Level 3: Contact 6kV, Air 8k
IEC/EN 61000-4-5 Surge Level 4: CM 4kV, DM 2kV - Environment
- Operating Temperature: -10~50 ℃ (14~122 ℉)
Storage Temperature: -40~70 ℃ (-40~158 ℉)
Operating Humidity: 10%~90% non-condensing
Storage Humidity: 5%~95% non-condensing - Control Methods
- Config Web Page SNMP V1/V2/V3 Telnet SSH RMON
- Reliability
- Backup and Restore
- Diagnostic Tools
- Cable Status/Length Diagnosis Ping
- Languages
- English
- Installation
- Desktop Rackmount via Brackets
Features
- Max Copper Speed and Distance
- Port Trunk Details
Price history
Plug PCs can earn a commission when you buy through links on this page, at no extra cost to you.