Plug PCs: compare computers from every brand
← Back to catalog
Cudy

6-Port Gigabit PoE+ Switch, GS1006P 2.0

Out of stock
Model6-PortSKUGS1006P
Ports6 ports
Port speed1G
PoE budget#1~#4
Switching capacity12 Gbps
Power draw30 W

Specifications 32

Ports & interfaces
Max Power on a Single PoE Port
30 W
Gigabit RJ45 Ports
6
Gigabit RJ45 PoE Ports
#1~#4
Extend Mode Ports
#3~#4
VLAN Mode Ports
#1~#4
Performance
Copper Speed and Distance Note
250-meter transmission is only available on the Extend Mode ports when the Extend Mode is activated.
MAC Address Table
2048
VLANs
4096
Max Switching Capacity
12 Gbps
Max Forwarding Rate
8.928 Mpps
Jumbo Frame
9 KB
Packet Buffer
1 Mbit
Forwarding Method
Store-and-Forward
Power & PoE
Power Input Type
AC Inlet
Power Methods
AC
Power Input
100-240V~ 50/60 Hz
Power Supply
65 W
Max Power Excluding PoE
5 W
Management & software
802.3 Protocols
802.3i 10BASE-T 802.3u 100BASE-TX 802.3ab 1000BASE-T 802.3x Flow Control 802.3af PoE 802.3at PoE
Physical & environment
Dimension
200 × 118 × 44 mm
7.87 × 4.65 × 1.73 inches
MTBF
>200,000 h
Connectivity
Networking
Full Duplex Half Duplex (CSMA/CD) Auto-Negotiation Auto MDI/MDIX
Physical & build
Casing Material
Metal
More details
LED
Power DIP Mode (SW) Link/ACT of Each Ethernet Port
Physical Buttons
VLAN/Default/Extend DIP Switch
Grounding Methods
Three-Prong Plug
EMS
IEC/EN 61000-4-2, Level 3 ESD: Contact: 6kV
Air: 8kV
IEC/EN 61000-4-5, Level 4 Surge: Power: DM 2kV, CM 4kV
RJ45: CM 4kV
Environment
Operating Temperature: 0~40 ℃ (32~104 ℉)
Storage Temperature: -40~70℃ (-40~158 ℉)
Operating Humidity: 10~90% non-condensing
Storage Humidity: 10~95% non-condensing
Installation
Desktop Rackmount via Brackets (Brackets not included in the box)
Features
  • PoE Port Notes
  • Physical Buttons Note
  • Max Copper Speed and Distance

Price history

loading…
Where to buyCudy · Check availability ↗

Plug PCs can earn a commission when you buy through links on this page, at no extra cost to you.

Embed this product card on your site

Paste where the live card should appear: