Plug PCs: compare computers from every brand
← Back to catalog
TP-Link

LS108GP 8-Port Gigabit Desktop Switch with 8-Port PoE+

SKULS108GP
Portstrue ports
Port speed1G
PoE budget62 W
Switching capacity16 Gbps
Power draw5.53 W (max)

Specifications 18

Ports & interfaces
PoE Ports (RJ45)
Standard: 802.3 af/at compliant
PoE Ports: Ports 1–8, up to 30 W PoE output per port
PoE Budget: 62 W
Performance
Jumbo Frame
16 KB
Switching Capacity
16 Gbps
Packet Forwarding Rate
11.9 Mpps
MAC Address Table
4K
Power & PoE
Power Supply
External Power Adapter (Output: 53.5 VDC / 1.31 A)
Max. Power Consumption
5.53 W (220 V/50 Hz. no PD connected)
71.61 W (220 V/50 Hz. with 62 W PD connected)
Management & software
Advanced Features
Extend Mode Button (Ports 1–2, Up to 250 m PoE power supply and data transmission)
PoE Auto Recovery Button (Ports 1-8)
Mac Address Auto-Learning and Auto-Aging
IEEE 802.3x Flow Control
802.1p/DSCP QoS
IGMP Snooping
Green Technology
Physical & environment
Dimensions ( W x D x H )
6.2 × 3.9 × 1.0 in (158 × 99 × 25 mm)
Fan Quantity
Fanless
Certifications
FCC, CE
Connectivity
Network Media
10BASE-T: UTP category 3, 4, 5 cable (maximum 100m)
EIA/TIA-568 100Ω STP (maximum 100m)
100BASE-TX: UTP category 5, 5e cable (maximum 100m)
1000BASE-T: UTP category 5, 5e, 6 or above cable (maximum 100m)
More details
Installation
Desktop
Wall Mounting
Max. Heat Dissipation
18.81 BTU/h (220 V/50 Hz. no PD connected)
243.47 BTU/h (220 V/50 Hz. with 62 W PD connected)
Transmission Method
Store-And-Forward
Package Content
LS108GP
Power Adapter
Installation Guide
Environment
Operating Temperature: 0–40 ℃ (32–104 ℉)
Storage Temperature: -40–70 ℃ (-40–158 ℉)
Operating Humidity: 10–90% RH non-condensing
Storage Humidity: 5–90% RH non-condensing
Hardware Revision
V1

I/O Ports 1

  • 8× 10/100/1000Mbps RJ45 Ports (Ports 1–8 supports 802.3af/at PoE+)
Where to buyTP-Link ↗

Plug PCs can earn a commission when you buy through links on this page, at no extra cost to you.

Embed this product card on your site

Paste where the live card should appear: