Plug PCs: compare computers from every brand
← Back to catalog
TP-Link

TL-SG1006PP 6-Port Gigabit Desktop Switch with 3-Port PoE+ and 1-Port PoE++

ModelTL-SG1006PP
Portstrue ports
Port speed1G
PoE budgetPort 1 compliances with 802.3af/at/bt
Switching capacity12 Gbps
Power draw4.75 W (max)

Specifications 16

Ports & interfaces
PoE Ports (RJ45)
Port 1 compliances with 802.3af/at/bt
Ports 2-4 compliance with 802.3af/at
Power Supply: 64 W
Performance
Packet Forwarding Rate
8.928 Mpps
Mac Address Table
4K
Switching Capacity
12 Gbps
Power & PoE
External Power Supply
External Power Adapter (Output: 53.5 VDC / 1.31 A)
Max. Power Consumption
4.75 W (220/50 Hz. no PD connected)
71.46 W (220/50 Hz. with 64 W PD connected)
Management & software
Advanced Features
Compatible With IEEE 802.3af/at/bt Compliant PDs
Mac Address Auto-Learning And Auto-Aging
IEEE 802.3x Flow Control
802.1p/DSCP QoS
IGMP Snooping
Extend Mode Button (Ports 1–2, Up to 250 m PoE power supply and data transmission)
PoE Auto Recovery (Ports 1-4)
Physical & environment
Dimensions ( W x D x H )
6.2 × 4.0 × 1.0 in (158 × 101 × 25 mm)
Fan Quantity
Fanless
Certifications
FCC, CE
Connectivity
Network Media
10BASE-T: UTP category 3, 4, 5 cable (maximum 100m)
EIA/TIA-568 100Ω STP (maximum 100m)
100BASE-TX: UTP category 5, 5e cable (maximum 100m)
1000BASE-T: UTP category 5, 5e, 6 or above cable (maximum 100m)
More details
Max. Heat Dissipation
16.20 BTU/h (220/50 Hz. no PD connected)
243.68 BTU/h (220/50 Hz. with 64 W PD connected)
Transmission Method
Store-And-Forward
Package Content
TL-SG1006PP
Power Adapter
Installation Guide
Environment
Operating Temperature: 0–40 ℃ (32–104 ℉)
Storage Temperature: -40–70 ℃ (-40–158 ℉)
Operating Humidity: 10–90% RH non-condensing
Storage Humidity: 5–90% RH non-condensing
Hardware Revision
V1

I/O Ports 1

  • 6× 10/100/1000Mbps RJ45 Ports
Where to buyTP-Link ↗

Plug PCs can earn a commission when you buy through links on this page, at no extra cost to you.

Embed this product card on your site

Paste where the live card should appear: