Plug PCs: compare computers from every brand
← Back to catalog
TRENDnet

10-Port Hardened Industrial Gigabit DIN-Rail Switch (TI-G102)

ModelTI-G102GTIN710931160925
Ports10 ports
Port speed1G
Weight1.1 lb

Specifications 16

Ports & interfaces
Device Interface
8 x Gigabit ports
2 x Gigabit Ethernet ports
2 x Shared SFP slots
6-pin removable terminal block
LED indicators
DIN-Rail mount
Wall mount
Grounding point
Power & PoE
Power
Input: 12 - 56 V DC
Compatible power supply: TI-M6024 (sold separately)
Consumption: 5.76 W max.
Physical & environment
Weight
415 g (1.1 lb)
Dimensions
155 × 120 × 48 mm (6.1 × 4.7 × 1.9 in.)
MTBF
510,400 hours
Operating Temperature
- 40 to 75 °C (-40 to 167 °F)
Operating Humidity
Max. 95 % non-condensing
Certifications
CE
FCC
Shock (EN 60068-2-27)
Freefall (EN 60068-2-32)
Vibration (EN 60068-2-6)
Warranty & support
Warranty
Lifetime Warranty*
More details
Standards
IEEE 802.3u
IEEE 802.3ab
IEEE 802.3z
IEEE 802.3x
Data Transfer Rate
Ethernet: 10 Mbps (half duplex), 20 Mbps (full duplex)
Fast Ethernet: 100 Mbps (half duplex), 200 Mbps (full duplex)
Gigabit: 2000 Mbps (full duplex)
Performance
Data RAM Buffer: 256 KB
Switching Fabric: 20 Gbps
MAC Address Table: 16 K entries
Jumbo Frame: 10 KB
Forwarding rate: 14.8 Mpps (64-byte packet size)
Terminal Block
Redundant power inputs, alarm relay contact, 6 pin
Wire range: 0.34 mm^2 to 2.5 mm^2
Solid wire (AWG): 12-24 / 14-22
Stranded wire (AWG): 12-24 / 14-22
Torque: 5 lb. – In / 0.5 Nm / 0.56 Nm
Wire strip length: 7-8 mm
Alarm Relay Contact
Relay outputs with current carrying capacity of 1 A, 24 V DC
Open circuit mode when two power sources are connected
Short circuit mode when only one power source is connected
Housing
IP30 metal case
DIN-rail mount
Wall mount
Grounding point
ESD 6 KV protection
Version
V1

Price history

loading…
Where to buyTRENDnet ↗colamco · $299.99 ↗check stock 21h ago

Plug PCs can earn a commission when you buy through links on this page, at no extra cost to you.

Embed this product card on your site

Paste where the live card should appear: